Construction Worksite Temporary Fence Installation

Construction Worksite Temporary Fence

Installation Construction Worksite Temporary Fence

Construction Worksite Temporary Fence are a necessity for the development of a place, but it is also the place which houses heavy equipment for the duration of the construction job. The are areas on site that could dangerous. Hence these spaces need to be fenced off for the duration of the construction project.

Construction Worksite Temporary Fence. This fencing cannot be permanent since the boundary wall will ultimately replace it. Thus it makes more economical and practical sense to surround the construction worksite with temporary fencing because:

These fences can be rented for any durations as and when required.

  • They can be easily installed and removed,
  • They are versatile and portable and can hence to transported anywhere and even installed in spaces with irregular contours,
  • They are sturdy enough to prevent trespassers from entering the premises and engaging in vandalism
  • They help protect the heavy and costly equipment kept on the worksite from damage,
  • It enables construction site owners to have controlled access to their worksites,
  • Sets up a clear boundary demarcating the construction worksite from its neighboring plots,

It prevents people from entering the worksite at night thereby reducing the possibility of fatal accidents or physical injuries being suffered by mischief-makers, thieves and even responsible people by virtue of reduced visibility, etc.

Construction Worksite Temporary Fence Installation

This, in turn, enables the workmen and the site managers to do their work without any distractions thereby ensuring that they stay on course with regards to both their time and work schedules. It also prevents financial losses that would otherwise be incurred by the construction company by way of compensation claims from third parties suffering bodily injuries as a result of trespassing into the construction worksite.

It has been generally seen that most construction worksites make use of metallic temporary construction fence rental from companies like These companies are well-equipped to transport the temporary fence to the required worksite along with the paraphernalia needed for its installation, get the same installed and even remove it when not needed and transport it back to their storehouse for reuse as required.

Installing a temporary fence

The installation of temporary fencing in construction worksites is necessitated by the rules of safety, security, and health prevalent in that particular state. In order to ensure that they are met, its installation to needs to be done so that the criteria set for the same is met by following the below-given steps:

Checking the conditions: space wherein the temporary fence needs to be constructed should be checked to ensure that:

  • Adequate, clear and level space is available,
  • Prevalent conditions are safe,

The positioning of the stays will not cause people to trip and
The weather is conducive to the installation of the fence.

Construction Site Fencing

Installation of the temporary fencing panel: After the finalization of the space to be barricaded, a single concrete block needs to be set in position first.

One temporary fence panel leg needs to be put into one of the holes present in this first concrete block. Then the next block has to be placed accordingly so that the other leg of the panel easily slides into one hole of the 2nd concrete block.

Panel connection: Subsequent panels need to be placed subsequently in a fashion similar to the placement of the first panel.

These panels need to be connected using clamps built for temporary fencing.
Nuts and bolts help to lock the clamps in place, but care should be taken to ensure that the:

Nuts and bolts are tightly fastened so that the fence becomes strong and sturdy and
The threaded side of the nut and bolt should face inwards so that it does not cause injury to people passing that area.

Installation of safety strays:  These serve as an anchor holding the fence firmly in place thereby ensuring that it does not fall when pushed. Brackets help connect these stays to the backside of the temporary fence.

Two brackets, one placed at the bottom and the other placed in the middle of the panel, help to keep them in place. To further increase the stability of the fence, these safety stays need to be weighed down using sandbags or concrete blocks.

Fence panel wrapping: Since this temporary fence is being installed around a construction worksite, it needs to be wrapped to prevent dust and debris from being blown from the worksite onto the surrounding spaces. Shade cloth or a banner mesh can be successfully and effectively used to wrap the temporary fence installed.

Fence maintenance: Temporary fences need to be carefully inspected at regular and short intervals, preferably every day is possible, to check to ensure that the stays and clamps are in place, it is properly anchored, the concrete blocks or sandbags used do not become a tripping hazard, etc.

Following the above-given steps will help install a temporary fence safely and securely thereby ensuring that the purpose for the same becomes a success.